PMX PTY LTD

Genuine Aussie Made Off-road Hitch (ADR compliant)

• ·  Dual (not single) Drawbar Safety Chains (ADR compliant)
• ·  Fully welded 100x50mm RHS drawbar
• ·  Fully welded 50x50mm RHS chassis
• ·  Solid 50mm steel axle with Ford wheel bearings
• ·  6 leaf heavy duty springs and Shock absorbers
• ·  10" electric drum brakes and adjustable handbrake
• ·  3x brand new 6 stud 235/75R15 wheels and tyres
• ·  Toolbox, Stonegaurd, Gas bottle and Jerry can holders
• ·  Stainless Steel Kitchenette with sink and water tap
• ·  Fully welded 70 Litre Stainless steel water tank
• ·  LED tailights and Electric water pump
• ·  High Grade 14oz ripstop canvas tent
• ·  Expandable travel cover and ties
• ·  Bonus Sunroom with removable walls and floor
• ·  Licenced Motor Vehicle Dealer and MTA member

Dual safety chains for added security.

AS4177.4 compliant.

"Swing-up" Pneumatic Jockey wheel for easier manouverability on a wider range of surfaces.

We will fit a flat or round trailer plug as per your requirements at no extra cost.

The Grey coloured travel cover is constructed out of waterproof 700gsm PVC and is fitted with zip

and velcro all the way around.It has 6 tie off points with heavy duty buckles to secure the cover.

Both the travel cover and all ties are expandable ensuring you will always be able to protect your

new canvas tent.We also have a range of canvas protection instore including wax sticks, waterproofing

and mould treatment liquids which are of the highest quality and designed specifically for

Polyester/Cotton composite canvas.

The Stainless Steel Kitchenette has lockable underneath storage and a side preperation table. It is

also fitted with a Stainless Steel sink which has a water tap fed by an electric water pump.

Galvanised stabiliser legs are fitted to the rear of the trailer and include a speed brace

and socket for winding. The legs are height and angle adjustable allowing perfect levelling of the trailer

with the greatest of ease.

The bed is hinged with 2x1200N gas struts making it easy to access the huge amounts of storage

space inside the trailer which is also sealed with rubberised foam.

Two 20 litre Jerry can holders and Two 4.0kg gas bottle holders are mounted in the Lockable side compartments

of the trailer, either side of the wheels arches.The large storage box mounted on the drawbar is made from seam

welded alluminium checkerplate. Gas struts are fitted to the lid to keep it open when needed and the large heavy

duty latches are key lockable for extra security.Not only do you also get a spare wheel holder and brand new

spare wheel and tyre but we have also fitted an extra heavy duty stonegaurd.

Heavy duty Leaf springs are held true by extended, braced and oversized mounts, hangers and plates. Shock

absorbers dampen vibration while 10inch electric drum brakes with mechanical handbrake are an essential feature for safe braking.

Our suspension mounts are made from 10mm thick steel plate which dramatically increases strenght and reliability.

All shackle bolts have been oversized to 9/16" units and come pre-greased with high pressure Lithium Compound.

These features are a complementary upgrade and are a must for Off-Road use.

The main tent area is 2.2 metres wide by 5.4 metres long and the fully enclosable sunroom area is 2.4 metres

wide by 5.4 metres long.The tent includes a matress which is 1.75 metres wide by 2.2 metres long. Made from

high density foam, it is comfortable, lightweight and easy to clean with its own cover.Large windows, some with

PVC lighting panels allow excellent air circulation in all conditions due to triangular raingaurd panels which

can be unzipped if required.

The main room floor is constructed of waterproof 600gsm PVC and raised 100mm up the side of the tent.

There are multiple storage pockets throughout the tent as well as power cord access points.

A large privacy screen seperates the sleeping area from the rest of the tent.

This screen can be opened throught the centre, rolled up or completely unzipped and dropped down.

Two internal ventillation panels can be unzipped tp provide ventillation during the most extreme weather

conditions. These panels also have mesh screens which can be seperately zipped up to keep

out the creepy-crawlys.

THE COMPLETE OFF-ROAD PACKAGE!!

With 25m2 of living area, this tent is suitable for singles, couples and families alike.

Numerous large windows and door entry points are all protected by a seconday layer of Midge proof netting

. All end windows can either be rolled partly up, fully up or extended and pegged out to suit your requirements.

The Bonus sunroom can be setup either as a roof only;

creating your own outdoor Alfresco area, or with the individual sides to create a fully enclosed room.

TRAILER Specification:

• Trailer Size
  • 7ft x 4ft with 22inch High Sides (2100x1220x550mm internal).
  • Drawbar Projection: 1750mm (Including tow hitch).
  • Drawbar Length: 2100mm.
  • Overall Length: 3750mm (Including tow hitch).
  • Overall Width: 1900mm.
  • Trailer Height: 1100mm (To top of trailer).
  • Overall Height: 1350mm (To top of tent ).
• Materials
  • 100 x 50 x 3mm RHS A-Frame.
  • 50 x 50 x 3mm RHS tube Chassis.
  • 50 x 50 x 3mm RHS floor supports
  • 40 x 40 x 2.5mm RHS Tailgate
  • 2.5mm steel plate floor (seam sealed).
  • 2.5mm pressed steel sidewalls.
  • 2.5mm pressed steel wheel arches.
  • 2.5mm Alluminium checkerplate trimmings.
  • 2.5mm Pressed Alluminium checkerplate toolbox – Fully seam welded
  • Rubber mud flaps (Black or white depending on stock availability).
• Surface finish
  • Cleaned and etched following construction
  • Powdercoated Satin Black
  • Acrylic seam sealed
  • This method ensures long service life and rust resistance.
• Electrical
  • LED Tailights.
  • Electric water pump
  • Conduted wiring throughout.
  • Choice of flat or round 7 pin connector.
  • Trailer is fully wired and ready to use.
• Kitchen facilities
  • Stainless steel sink with water tap
  • 70 litre stainless steel water tank
  • Electric water pump.
  • Fold out side table.
  • Drop down draw to access under sink.
  • Flexible sink drain hose.

• Suspension
  • Heavy duty 6 leaf springs
  • Shock absorbers
  • Oversized suspension bolts
  • Eye to Eye shackle mounts.
  • Oversized and braced shackle mounts
  • Fully bushed Springs and mounts
• Axle
  • 50mm solid steel axle
  • Ford wheel bearings
  • 2500Kg rated
• Brakes
  • 10 inch electric brakes
  • Mechanical handbrake.
• Wheels and Tyres
  • 3 x Brand new 15” 6-stud Landcruiser pattern rims.
  • 3 x Brand new 235/75R15 radial tyres.
• Hitch & Safety Chains
  • 360 degree Full rotation Off-road Hitch
  • TREG or TRIGG, depending on availability
  • Two AS 4177-16 Safety chains.
• Jockey Wheel
  • Heavy duty swing up jockey wheel
  • Pneumatic Heavy duty
• Jerry Can Holders
  • 2 x 20 Litre galvanised Jerrycan holders.
• Gas Bottle Holders
  • 2 x 4.0Kg galvanised Gas Bottle holders.
• Tailgate
  • Lockable Swing out tail gate
  • Heavy duty welded pin hinges
  • 40x40x2.5mm RHS Construction
  • Super strong - no need for stabiliser leg!
• Stabiliser legs
  • 2 x Fully Adjustable Galvanised legs.
  • Includes speed brace and socket
• Weight and ratings
  • TARE: 710Kg GVM: 1500Kg

•  
• Protection:
  • All access doors are lockable.

TENT Specification:

• Tent Colour
  • Grey

• Fabric/Materials
  • Roof: 14oz Heavy Duty Rip-Stop Canvas.
  • Wall: 14oz Heavy Duty Rip-Stop Canvas.
  • Partition: 14oz Heavy Duty Rip-Stop Canvas.
  • Window Covers: 14oz Heavy Duty Rip-Stop Canvas.
  • Floor: 600g Grid PVC (Sewn in floor in main bedroom).
  • Floor: 220g Grid Polyethylene (removable for ALL extensions).
  • Windows: Mosquito Proof Netting and PVC screen on selected windows.
  • Travel Cover: 700g Grid PVC (Grey colour).
  • Mattress: King size, High Density with removable, washable cover.

• Tent Size
  • Main Room: 18ft x 8ft (5.35m x 2.3m).
  • Sunroom 1: 18ft x 8ft (5.35m x 2.4m).

• Tent Frame
  • Hinged bed base for easy storage access
  • 2 Extra heavy duty gas struts(1200N each)
  • Pivoting poles in the main room.
  • Fully Self-supporting, galvanized frame.
  • 25mm/22mm/19mm EZY-SLIDE Galvanized pole.
  • 18mm marine plywood bed base with steel frame.
  • Aluminum angle secures the tent to the Plywood base.
  • 2 removable plywood panels for storage access.
  • 2 zipper doors in main room for storage access.
  • Bedroom divider / Privacy screen

• Other Inclusions
  • Lightweight stepladder.
  • Every room has its own floor.
  • Floor protector in main room
  • Every room has its own divider wall with door.
  • Annex Roof uses double stitched Velcro and Extra Heavy duty double zip.
  • Extra poles for all windows.
  • Extra Ropes and Pegs for all rooms/windows.

• Other features

• Tent opens from left to right.
• Pivoting bed poles allow for quick setup of the main tent.
• All Annexes have removable Sides.
• Self Supporting Modern Design.
• Easy Foldout Frame Enables Easy Setup.
• Internal access to trailer via flaps in main room.
• Roof joins are secured with double stitched Velcro and heavy duty zip.
• Annex Walls are Velcro fitted to roof allowing for Quick Setup.
• Large Windows in Cooking Area that can be used as a Sunroom.
• U Shape Partition Entrance for bedroom with double side zipper and removable lightweight ladder.
• Access can be gained to trailer while tent is attached through two hatches under bed mattress & from the tailgate.
• High Strength Galvanised Steel Frame.
• Easy Slide Poles allow Quick Setup and save space.
• Mosquito Proof Netting On All Doors and Windows.Peg-out or roll-up window covers with corner eyelets have triangular flaps in every bay to block out unwanted rain or sun.