PMX PTY LTD

•  
•  
• Suitable for 6x4, 6x5, 7x4 and 7x5 trailers and ute trays
• Required mounting height: 950-1100mm
• 2300mm peak roof height
• Self supporting modular design
• Large bay windows with canvas flaps
• Double entry doors with zipped mesh screens
• Mesh screen on all windows
• Clear PVC screens on selected windows
• 600g PVC stitched-in Main room floor
• 220g PVC fitted sunroom floor
• Large high density mattress included (1800 x 2200mm)
• All ropes, pegs and poles are included

EXPANDABLE TRAVEL COVER

• The best travel cover on the market - 20% stronger!
• 750g Grid PVC Travel cover
• Keeps your canvas clean and dry
• Easy to remove with heavy duty zipper
• 8 Double stitched tie down flaps with heavy duty buckles
• 4 anti-ballooning straps with quick release buckles

The expandable travel cover allows enough room to store all of your sunroom extensions and more on top of your trailer.

ROOM TO MOVE!!

• 25m2 of living area
• Each room has its own floor
• Triangular flaps on bay windows
• Roll up or peg out windows
• Combination PVC/mesh windows
• Includes all ropes, pegs and poles

The 18mm Plywood base is fixed to a steel frame. This allows the tent to be fitted to a wide variety of trailers and even some tray back utes!!

SPACIOUS AND COMFORTABLE

• Self supporting galvanised frame
• Spreader poles included
• Fitted sunroom floor attaches with 5cm velcro on all 4 sides

With a high roof and large windows with triangular flaps to block the sun and rain, the DL-230 tent provides superior ventillation in all conditions.

STORAGE ACCESS

The two large plywood panels in the centre of the base are removable. They can be lifted from inside the tent and make it easy to access the storage area of your trailer.

Comprehensive framework makes it easy to adapt the DL-230 Tent to a large ranges of trailers and even some trayback utes.

Optimum mounting height: 1050mm

PROTECTING YOUR ASSETS

To protect the floor, all WA - Camper Trailer Tents have a colour coded PVC flap sewn in to prevent the ladder damaging your floor.

Each of the upstanding poles has a similar feature where 2 extra pockets are sewn in to locate the poles and protect the floor.

There are two panels located in the main tent area that allow you to access the side storage compartments of your trailer. These panels also have Mesh screens so they can also be used for extra ventillation.

This package also includes the ladder.

IT COULDN'T BE ANY EASIER!!

Setting up your Main tent can be easily done in under ten minutes!

• Remove the travel cover and fully extend the PVC floor.
• Hold the end pole in the centre at the top and pull until the bed poles are lifted.
• Enter the tent and fit your spreader poles (A second person or tie off point will be required, especially in windy conditions).
• Extend all of the upstanding poles and spreader poles.
• Your tent is now setup!!

If it is windy or your are expecting it to be windy, we recommend using the supplied ropes and pegs to secure the tent.